Legal Terms / Helmets limitations of liability - Applicable law
PROPER USE: This helmet is a protection device and should be treated as such. Under no circumstances should the helmet be dropped or carelessly used in anyway which could cause damage. This damage may not be visible or even if visible, it may in some instances reduce the helmets performance. Therefore if subjected to a severe impact, the helmet should be destroyed and replaced.
SAFETY PRECAUTIONS: No helmet can protect the user against all possible types of impacts.
For maximum protection, the helmet must fit firmly on the head and all retention straps must be securely fastened. No attachments should be added or alterations made to the helmet except those recommended by the manufacturer. Do not remove parts from the helmet without replacing them with genuine replacements.
PACKAGING: A padded helmet carry-bag is recommended. For freighting we recommend that the helmet is packaged in its original Ruby box.
MAINTENANCE: The helmet may be damaged and rendered ineffective by such materials as petroleum and petroleum products, cleaning agents, paints and adhesives, without the damage being visible to the user. For the list of suitable cleaning agents that can be applied to the helmet, please contact the manufacturer.
TERMS, CONDITIONS AND WARRANTIES (INCLUDING ANY WARRANTY AS TO MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE) IMPLIED BY COMMON LAW OR STATUTE (IMPLIED WARRANTIES), AS TO THE QUALITY OR SPECIFICATIONS OF THE HELMET, ARE EXCLUDED UNLESS THE EXCLUSION OF ANY SUCH IMPLIED WARRANTIES WOULD CONTRAVENE APPLICABLE LAWS OR CAUSE ANY PART OF THIS WARRANTY TO BE VOID. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF MANUFACTURER HEREUNDER ARE EXCLUSIVE. THE MANUFACTURER WILL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGE ARISING FROM THE USE OF THE HELMET.
WARNING: (1) THE HELMET CANNOT PROTECT AGAINST ALL POSSIBLE IMPACTS, AND SERIOUS INJURY OR DEATH COULD OCCUR WHILE WEARING THE HELMET.
(2) AN IMPROPERLY FITTED OR FASTENED HELMET MAY "ROLL OFF" THE HEAD IN A COLLISION OR AT ANYTIME. FOR MAXIMUM PROTECTION THE HELMET MUST BE FITTED AND ATTACHED PROPERLY TO THE WEARER'S HEAD IN ACCORDANCE WITH THE MANUFACTURER'S FITTING INSTRUCTIONS.
(3) AFTER RECEIVING AN IMPACT, THE HELMET MAY BE DAMAGED TO THE POINT THAT IT IS NO LONGER ADEQUATE TO PROTECT THE HEAD AGAINST FURTHER IMPACTS. THIS DAMAGE MAY NOT BE VISIBLE TO THE USER. A HELMET THAT HAS SUSTAINED AN IMPACT SHOULD BE DESTROYED AND REPLACED.
Dispute Resolution: Any dispute relating to this warranty, the materials or manufacturing of the helmet shall be resolved by binding arbitration before a single arbitrator in Delaware, pursuant to the Commercial Arbitration Rules then obtaining of the American Arbitration Association. The arbitrator shall apply the substantive law of Delaware except that the interpretation and enforcement of this arbitration provision shall be governed by the Federal Arbitration Act. The arbitrator shall not award either party punitive damages, and the parties shall be deemed to have waived any right to such damages. The proceedings shall be confidential and the arbitrator shall issue appropriate protective orders to safeguard both parties' confidential information. The prevailing party in any proceeding brought hereunder shall be entitled to recover its costs and reasonable attorney's fees, except that the fees of the arbitrator shall be split equally between the parties.
Any conduct which recognizes the existence of this Manual User - Warranty, including but not limited to the purchase of the helmet by user shall constitute acceptance of this User Manual - Warranty and all of its terms and conditions.
Website Responsibility
Online selling engages the vendor to a means responsibility. Les Ateliers Ruby shall not be liable for damages that result from the use of, or the inability to use, the website. Les Ateliers Ruby does not warrant that the functions contained in the website will be uninterrupted or error-free, suffer intrusion, virus attack and other involuntary difficulties.
SAFETY PRECAUTIONS: No helmet can protect the user against all possible types of impacts.
For maximum protection, the helmet must fit firmly on the head and all retention straps must be securely fastened. No attachments should be added or alterations made to the helmet except those recommended by the manufacturer. Do not remove parts from the helmet without replacing them with genuine replacements.
PACKAGING: A padded helmet carry-bag is recommended. For freighting we recommend that the helmet is packaged in its original Ruby box.
MAINTENANCE: The helmet may be damaged and rendered ineffective by such materials as petroleum and petroleum products, cleaning agents, paints and adhesives, without the damage being visible to the user. For the list of suitable cleaning agents that can be applied to the helmet, please contact the manufacturer.
TERMS, CONDITIONS AND WARRANTIES (INCLUDING ANY WARRANTY AS TO MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE) IMPLIED BY COMMON LAW OR STATUTE (IMPLIED WARRANTIES), AS TO THE QUALITY OR SPECIFICATIONS OF THE HELMET, ARE EXCLUDED UNLESS THE EXCLUSION OF ANY SUCH IMPLIED WARRANTIES WOULD CONTRAVENE APPLICABLE LAWS OR CAUSE ANY PART OF THIS WARRANTY TO BE VOID. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF MANUFACTURER HEREUNDER ARE EXCLUSIVE. THE MANUFACTURER WILL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGE ARISING FROM THE USE OF THE HELMET.
WARNING: (1) THE HELMET CANNOT PROTECT AGAINST ALL POSSIBLE IMPACTS, AND SERIOUS INJURY OR DEATH COULD OCCUR WHILE WEARING THE HELMET.
(2) AN IMPROPERLY FITTED OR FASTENED HELMET MAY "ROLL OFF" THE HEAD IN A COLLISION OR AT ANYTIME. FOR MAXIMUM PROTECTION THE HELMET MUST BE FITTED AND ATTACHED PROPERLY TO THE WEARER'S HEAD IN ACCORDANCE WITH THE MANUFACTURER'S FITTING INSTRUCTIONS.
(3) AFTER RECEIVING AN IMPACT, THE HELMET MAY BE DAMAGED TO THE POINT THAT IT IS NO LONGER ADEQUATE TO PROTECT THE HEAD AGAINST FURTHER IMPACTS. THIS DAMAGE MAY NOT BE VISIBLE TO THE USER. A HELMET THAT HAS SUSTAINED AN IMPACT SHOULD BE DESTROYED AND REPLACED.
Dispute Resolution: Any dispute relating to this warranty, the materials or manufacturing of the helmet shall be resolved by binding arbitration before a single arbitrator in Delaware, pursuant to the Commercial Arbitration Rules then obtaining of the American Arbitration Association. The arbitrator shall apply the substantive law of Delaware except that the interpretation and enforcement of this arbitration provision shall be governed by the Federal Arbitration Act. The arbitrator shall not award either party punitive damages, and the parties shall be deemed to have waived any right to such damages. The proceedings shall be confidential and the arbitrator shall issue appropriate protective orders to safeguard both parties' confidential information. The prevailing party in any proceeding brought hereunder shall be entitled to recover its costs and reasonable attorney's fees, except that the fees of the arbitrator shall be split equally between the parties.
Any conduct which recognizes the existence of this Manual User - Warranty, including but not limited to the purchase of the helmet by user shall constitute acceptance of this User Manual - Warranty and all of its terms and conditions.
Website Responsibility
Online selling engages the vendor to a means responsibility. Les Ateliers Ruby shall not be liable for damages that result from the use of, or the inability to use, the website. Les Ateliers Ruby does not warrant that the functions contained in the website will be uninterrupted or error-free, suffer intrusion, virus attack and other involuntary difficulties.
BACK
